Electrical Relief handles panel upgrades, full house rewires, EV charger installs, indoor and outdoor lighting, generator hookups, sauna heater wiring, and after-hours emergency electrical work across the Denver metro. Live dispatcher every hour, licensed Colorado electrician at the door inside sixty minutes, permits pulled on every job.
From a single dimmer swap to a full panel replacement and a Tesla Wall Connector — every job follows the same routine: scope the work, pull the permit, do it right, get it inspected, document the closeout.
Tripped breaker that won't reset, sparking outlet, partial power outage, burning smell from a panel — call any hour. Licensed electrician on the line, truck on the road inside sixty minutes.
Call now →100A or 150A house running out of capacity? We replace the service panel with 200A or 400A, pull the Denver Building Department permit, coordinate the meter pull with Xcel, and get it inspected.
Get a quote →Level 2 home chargers — Tesla Wall Connector, ChargePoint, JuiceBox, Wallbox. Dedicated 240V circuit from the panel, mounted, permit pulled, inspected, ready to plug in.
Schedule install →Knob-and-tube, ungrounded two-prong outlets, aluminum wiring — replaced with modern grounded copper to current code. Phased so you can stay in the house while the work proceeds.
Get a quote →Recessed cans, kitchen pendants, chandeliers, dimmers, smart switches. From a single fixture swap to a full kitchen retrofit — we tie into the existing circuits or run new ones as needed.
Get a quote →Landscape lighting, motion-sensor security lights, soffit-mounted floods, post lights, low-voltage path systems. Weather-rated junction boxes, GFCI protection, photocell or smart-switch control.
Schedule a visit →Whole-house standby generators with automatic transfer switches, dedicated subpanels for critical loads, propane or natural-gas hookups, and proper Xcel coordination so the install is signed off correctly.
Get a quote →Electric sauna heaters need a dedicated 240V circuit at 30 to 50 amps depending on the model. We size the wire and breaker to the manufacturer's spec, run conduit, install the disconnect, and pull the permit.
Schedule install →A typical job — discover the scope, diagnose the right approach, deliver the work, document the closeout. Most residential service calls finish inside the same window from the first call to the inspector's sign-off.
Walk the property, count the circuits, photograph the panel and the work area, identify what permits are needed, write up a fixed-price quote.
Wire gauge, breaker size, conduit run, fixture spec — all written into the scope so there are no surprises during the install or at inspection.
Permit pulled with Denver Building Department, work performed to NEC code, every circuit tested under load before the panel cover goes back on.
Inspector schedules with us directly, sign-off paperwork delivered, copies of the permit and inspection card filed and emailed for your records.
Doing the work right is half the job. Pulling the permit, scheduling the inspection, getting the sign-off paperwork in your hand at the end — that's the other half. We handle both.
If a future inspector or a future buyer's home inspector asks about the panel, the EV circuit, or the kitchen rewire — there's a permit number on file that says it was inspected and signed off.
Tesla Wall Connector, ChargePoint, JuiceBox, Wallbox, Grizzl-E, ClipperCreek — we install the major brands and pull the Denver permit on every job.
A Level 2 EV charger needs a dedicated 240V circuit pulled from the service panel, sized to the charger amperage (typically 40-50A for residential). We size the wire and the breaker to the manufacturer's spec, mount the unit on the wall in the garage or on an exterior pedestal, pull the Denver Building Department permit, and stay through the inspection.
A sample of recent jobs across the Denver metro — panel work, lighting, EV chargers, generators, kitchen retrofits, sauna heaters, security lighting. Permitted, inspected, signed off.
Dispatched from 4891 Washington St in Denver — covering Aurora, Lakewood, Englewood, Wheat Ridge, Commerce City, Thornton, Westminster, Glendale, and the broader metro.
Real homeowners, real jobs, real inspectors who signed off — across Denver, Aurora, Lakewood, and the rest of the metro.
Bought a 2018 EV and needed a Level 2 charger in the garage. They came out, looked at the existing panel, said it had room, ran a 50A circuit through the basement and out to the garage wall, mounted the Tesla Wall Connector, pulled the permit, met the inspector. Two days end to end and the install looks cleaner than the rest of the panel.
House had a 100A panel from the 1970s and we were tripping breakers every time we ran the dishwasher and the oven at the same time. They quoted a 200A upgrade with a new meter base, coordinated the meter pull with Xcel, did the work in a single day with power back on by evening, and the inspector signed off the next morning.
Called at 11pm on a Friday because half the house had no power and the other half was flickering. The dispatcher answered live, the electrician was at the door inside the hour, found a corroded neutral at the meter base, temp-fixed it that night, and came back Monday with the proper repair and the permit. Calm, professional, and didn't gouge me on the after-hours rate.
The questions Denver homeowners ask most often. If yours isn't here, the dispatch line picks up — any hour of the day or night.
Tripped breaker, sparking outlet, dead panel, EV charger waiting to be hung — pick up the phone. Licensed Colorado electrician on the line, every hour, every day. Truck in the lot, ready to roll.